WHAT YOU NEED:
- X-Press It Canvas
- X-Press It TripleTac
- X-Press It Paint Brush
- A printed photograph
STEP 1:
Apply a generous coat of TripleTac to the surface that you are transferring the image onto. Images printed from a laser printer or patterned paper will give the best results.
STEP 2:
Place the image onto the coated surface face-down & allow to dry. (24 hours is recommended)
STEP 3:
Using a small amount of water, gently rub the back of the paper with a wet finger or cloth, until the paper starts to pill. Continue wetting & rubbing, until the image is revealed. To avoid patchy results, take care not to rub too much in one area.
STEP 4:
Apply a second coat of TripleTac, to seal the image. Allow to dry. (24 hours is recommended). Your TripleTac Canvas is now completed and ready to be displayed.